|
|
| |
|
 | Search: |
|
|
 |
|
|
clicker 2 is a battery-powered click board with two mikroBUS sockets on board allowing you to take advantage of the huge potential of click boards. This clicker 2 is powered by FT900, a 32-bit FT32 core MCU that operates at 100MHz, has 256kB of flash, 64kB on-chip data memory, and 256kB shadow program memory. The shadow program memory is where the code is executed from, enabling the MCU to work with zero wait states at 100MHz — making it faster than many MCUs with higher clock rates. The onboard LTC 3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for FT900 features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch). clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want. |
|
|
|
|
 |
|
|
1 meter long USB type A to type Mini-B cable, with roll mechanism. It can be used to ease connections to your development tools and boards. |
|
|
|
|
|
|
3.7V, 2000mAh Lithium-Polymer battery. It comes with a standard connector, compatible with various mikroElektronika development boards.
Size: 63 x 44 x 6mm. |
|
|
|
|
|
|
mikroTFT is a breakout board for MI0283QT-9A 2.8" TFT color display with 320 x 240 pixel resolution, driven by ILI9341 display controller. TFT display is covered with a resistive touch panel which can be used as an input device. For further connectivity two 1x26 side headers are provided. Mounting holes (∅ 2.29 mm) located in each corner simplify integration. Board is designed in the same form factor as mikromedia boards. This allows you to easily switch from mikroTFT to mikromedia, and vice-versa, while retaining most of the integration features. |
|
|
|
|
|
|
