|
IQRF 2 click Released
IQRF 2 click carries the DCTR-72DAT RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: AN, PWM.
|
2017/05/25 |
|
IQRF click Released
IQRF click carries the DCTR-76DA RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: AN, RST, PWM, INT.
|
2017/05/25 |
|
LPS22HB click Released
LPS22HB click is an easy solution for adding a digital barometer to your design. It carries the LPS22HB MEMS nano pressure sensor. The click is designed to run on a 3.3V power supply. LPS22HB click communicates with the target microcontroller over I2C or SPI interface.
|
2017/05/25 |
|
MCP1664 click Released
MCP1664 click contains 4 high-power white LEDs. It carries the MCP1664, a high-voltage step-up LED driver from Microchip. MCP1664 click is designed to run on either 3.3V or 5V power supply. It communicates with the target board microcontroller over the PWM pin on the mikroBUS™ line.
|
2017/05/25 |
|
clicker 2 for dsPIC33 Released
clicker 2 for dsPIC33 is a compact dsPIC development kit with two mikroBUS™ sockets for click board connectivity. It carries a 16-bit dsPIC33EP512MU810 microcontroller from Microchip, with a 70 MIPS dsPIC DSC core. With a built-in USB-HID bootloader the clicker 2 for dsPIC33 it easy to program.
|
2017/05/25 |
|
RN4871 click (BlueTooth) Released
RN4871 click carries the RN4871 Bluetooth® 4.2 low energy module from Microchip. The click is designed to run on a 3.3V power supply. It uses ASCII Command Interface over UART for communication with target microcontroller, with additional functionality provided by the following pins on the mikroBUS™ line: RST, CS, and INT.
|
2017/05/25 |
|
RN4870 click (BlueTooth) Released
RN4870 click carries the RN4870 Bluetooth® 4.2 low energy module from Microchip. The click is designed to run on a 3.3V power supply. It uses ASCII Command Interface over UART for communication with target microcontroller, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, INT, RST, CS.
|
2017/05/25 |
|
Grid-EYE click Released
Grid-EYE click is a 8x8 thermal array sensor-detector that carries the AMG8853 infrared array sensor from Panasonic. 64 individual thermal sensors build an image on a display. The detecting distance is 5m.
|
2017/05/25 |
|
Intel® Joule™ click SHIELD Released
Intel® Joule™ click SHIELD is an extension for Intel® Joule™ Expansion Board. This click shield allows you to add more than 270 click boards™ to your project. Add displays, WiFi, ZigBee or Bluetooth transceivers, Ethernet modules, sensors, MP3 codec circuit and other features to your prototype with ease.
|
2017/05/25 |
|
mikroProg for MSP432 Released
mikroProg™ for MSP432 is a fast and reliable USB programmer and hardware debugger. This mikroProg supports the SimpleLink™ MSP432™ microcontroller family from Texas Instruments.
|
2017/05/25 |
|
clicker 2 for MSP432 Released
Clicker 2 for MSP432 is a compact development board with two mikroBUS™ sockets for click board connectivity. It carries the SimpleLink™ MSP432™ - ARM® 32-Bit Cortex®-M4F CPU with integrated 1Msps 14-bit SAR-based ADC from Texas Instruments.
|
2017/05/25 |
|
MSP432 Clicker Released
MSP432 clicker is a compact development board with a mikroBUS™ socket for click board connectivity. It carries the SimpleLink™ MSP432™ - ARM® 32-Bit Cortex®-M4F CPU with integrated 1Msps 14-bit SAR-based ADC from Texas Instruments.
|
2017/05/25 |
|
Hexiwear Battery Pack Released
Hexiwear Battery Pack will keep your favorite IoT development kit charged. You can add any functionality with the onboard mikroBUS™ socket. Add sensors, transceivers, speech recognition modules and more. No more cables and worrying if the battery on it will last the day.
|
2017/05/25 |
|
THERMO 5 click Released
THERMO 5 click measures temperature in default range of 0°C to 127°C and extended range of -64°C to 191°C with ±1°C accuracy. It carries the EMC1414 temperature sensor. The click is designed to run on a 3.3V power supply. THERMO 5 click communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line.
|
2017/05/17 |
|
WiFi 7 click Released
WiFi 7 click carries the ATWINC1510-MR210PB IEEE 802.11 b/g/n module, specifically optimized for low-power IoT applications. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, INT, RST.
|
2017/05/17 |
|
THERMO 4 click Released
THERMO 4 click carries the LM75A digital temperature sensor and thermal watchdog. The sensor has the range from -55 °C to +125 °C. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line.
|
2017/05/17 |
|
CAN Isolator click Released
CAN Isolator click provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter. The click is designed to run on either 3.3V or 5V power supply. CAN Isolator click communicates with the target microcontroller over UART interface.
|
2017/05/17 |
|
EMG click bundle Released
EMG click bundle - measure the electrical activity of muscles.
|
2017/05/17 |
|
EMG click Released
EMG click measures the electrical activity produced by the skeletal muscles. It carries MCP609 operational amplifier and MAX6106 micropower voltage reference. EMG click is designed to run on a 5V power supply. The click board™ has an analog output (AN pin).
|
2017/05/17 |
|
MCP2517FD click (CAN) Released
MCP2517FD click serves as a CAN connector. It carries a DB9 9-pin connector, as well as ATA6563 high-speed CAN transceiver. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller through SPI interface, with additional functionality provided by the following pins on the mikroBUS™ socket: AN, PWM, INT, CS, SCK, MISO, MOSI, TX and RX.
|
2017/05/08 |
|
