|
OSD click Released
OSD Click features the MAX7456 single-channel monochrome OSD module with integrated EEPROM memory as well as two RCA sockets. It is used to create on-screen menus and other video overlays - such as custom graphics, company logos, time and date, etc - using 256 user-programmable characters or pictographs. It is NTSC and PAL compatible and displays up to 16 rows x 30 characters. The MAX7456 has an internal sync generator. OSD Click communicates with the target microcontroller via mikroBUS SPI (SDI, SDO, SCK, CS#), RST, LOS, HSYNC and VSYNC lines. The board is designed to use a 5V power supply only. A green LED diode indicates the presence of power supply.
|
2012/11/30 |
|
DALI click Released
DALI Click is a compact board that enables you to add Digital Addressable Lighting Interface (DALI) to your design. The board features two optocouplers, a push button and screw terminals. DALI Click communicates with the target board via four mikroBUS lines (RST, CS, PWM and INT). Data between MCU and devices is transferred over two-wire differential bus by means of an asynchronous, half-duplex, serial protocol. It is possible to address up to 64 devices in a DALI stand alone systems and more than 64 devices as DALI subsystems (gateways). The board is designed to use a 3.3V or 5V power supply, and has an LED diode to indicate the presence of power.
|
2012/11/12 |
|
IrThermo click Released
IrThermo Click features either the MLX90614ESF-BAA (3.3V) or MLX90614ESF-AAA (5V) single zone infrared thermometer module capable of non-contact temperature measurements. It is calibrated in wide temperature ranges: -40 to 85°C for the ambient temperature and -70 to +380°C for the object temperature (-20 to 120°C in PWM mode). IrThermo Click communicates with the microcontroller via mikroBUS I2C lines (SCL, SDA) or PWM line. The sensor is ideal for automotive use, industrial temperature control, body temperature measurement, movement detection, air conditioning control and more.
|
2012/11/12 |
|
Breeze B Released
Breeze boards are versatile development boards for 28-pin PIC microcontrollers. Use them for learning, for rapid prototyping of your next project, or as the core board in your final product.
The Breeze B includes a microcontroller with built-in USB support.
|
2012/10/18 |
|
Breeze A (Amicus Compatible) Released
Breeze boards are versatile development boards for 28-pin PIC microcontrollers. Use them for learning, for rapid prototyping of your next project, or as the core board in your final product.
The Breeze A includes a USB-UART converter, for easy serial communication with a computer.
|
2012/10/18 |
|
GSM click Released
GSM Click is an add-on board in the mikroBUS form factor and is a perfect solution for adding a GSM/GPRS communication layer to your device. It features the Telit GL865-QUAD GSM/GPRS module which supports GSM/GPRS 850/900/1800/1900 MHz Quad-band frequency. The board contains a TXB0106 6-bit bidirectional voltage-level translator as well as a SIM card socket. GSM Click communicates with the target microcontroller via seven mikroBUS lines (RX, TX, INT, PWM, CS, RST and AN). The board uses a 3.3V power supply, but can communicate at either 3.3V or 5V voltage levels (selection by SMD jumper). An LED diode indicates the presence of power supply.
|
2012/10/09 |
|
nRF C click (nRF24L01) Released
nRF C Click is an add-on board organised in the mikroBUS form factor. It features a Nordic nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine as well as 2.4 GHz SMD chip antenna. The board supports an air data rate of 250 Kbps, 1 Mbps and 2 Mbps and it is suitable for ultra low power designs. Typical applications include wireless PC peripherals, remotes, VoIP headsets, game controllers, sensors, home and commercial automation, active RFID, toys, etc. nRF C Click communicates with the target board microcontroller via mikroBUS SPI (SDI, SDO, SCK, CS#), CE and INT lines. The board is designed to use a 3.3V power supply only.
|
2012/10/09 |
|
nRF T click (nRF24L01) Released
nRF T Click is an add-on board in the mikroBUS form factor. It features the Nordic nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine as well as 2.4 GHz PCB trace antenna. The board supports an air data rate of 250 Kbps, 1 Mbps and 2 Mbps and it is suitable for ultra low power designs. Typical applications include wireless PC peripherals, remotes, VoIP headsets, game controllers, sensors, home and commercial automation, active RFID, toys, etc. nRF C Click communicates with the target board microcontroller via mikroBUS SPI (SDI, SDO, SCK, CS#), CE and INT lines. The board is designed to use a 3.3V power supply only.
|
2012/10/09 |
|
New Product: Thermocouple Type-K Probe
Type-K thermocouple with glass braid insulation is used for precision measurements of high temperatures. The thermocouple itself can measure up to 480°C. It is 2 meters long and ends with a PCC-SMP connector which is compatible with the THERMO click board.
|
2012/09/18 |
|
Manufacturing 2.1 Released
Manufacturing 2.1 has been released, featuring a greatly-simplified approach to shopping-list generation - the Dynamic Shopping List.
|
2012/09/09 |
|
8x8 click Released
8x8 R Click is an add-on board in the mikroBUS form factor. It's a compact and easy solution for adding an 8x8 LED matrix display to your design. It features the MAX7219 8-digit LED display driver module as well as 64 LED diodes. 8x8 Click communicates with the target microcontroller via four SPI lines (DIN, DOUT, CLK and CS). The board is designed to be powered by 5V, but can also communicate with 3.3V MCUs.
|
2012/09/09 |
|
4-20mA T click Released
4-20mA T Click is an add-on board in mikroBUS form factor. It's a compact and easy solution for adding an industry standard 4-to-20mA current loop communication protocol to your design. It features the ADuM1411 quad-chanel digital isolator, MCP4921 12-bit DAC as well as the XTR116 4-20mA current loop transmitter. The board communicates with the microcontroller via three SPI lines (SDI, SCK and CS). The board can be used with either a 3.3V or 5V power supply. An LED indicates the presence of power supply to the board.
|
2012/09/02 |
|
EasyPIC Fusion v7 Released
The EasyPIC Fusion v7 combines support for three different architectures - dsPIC33, PIC24 and PIC32 - in a single development board. It contains many on-board modules; including multimedia, Ethernet, USB, CAN and more. The on-board mikroProg programmer and debugger supports over 65 devices. An EasyTFT board is included with the system.
|
2012/09/02 |
|
Ready for PIC with 18F25K22
As well as the 40-pin PIC18F45K22 version, the Ready for PIC board now also comes in a 28-pin PIC18F25K22 version.
|
2012/09/01 |
|
SDHC FAT16 Tutorial
We've put together a tutorial on how to format an SDHC/FAT32 SD-card as FAT16 (available here).
|
2012/08/28 |
|
USB SPI click Released
USB SPI Click is an accessory board in the mikroBUS form factor. It is a compact and easy solution for adding SPI serial communication via USB. It features the MCP2210 USB-to-SPI protocol converter with GPIO as well as USB MINI B connector. USB SPI click communicates with target board via SPI interface as a master device. An SMD jumper is available for selecting whether board will be operating on a 3.3V or 5V power supply.
|
2012/08/16 |
|
USB UART click Released
USB UART Click is an accessory board in the mikroBUS form factor. It is a compact and easy solution for adding serial UART communication via USB to your project. It features the FT232RL USB-to-UART interface module as well as a USB MINI B connector. The board is powered with 5V, but is designed to use 3.3V or 5V I/O levels (selectable via an SMD jumper). The board also features power, Rx and Tx LEDs.
|
2012/08/08 |
|
7seg click Released
7seg click is an accessory board in mikroBUS form factor. It's a compact and easy solution for adding a 2-digit seven-segment display to your device. It features two 74HC595 8-bit serial-in, parallel-out shift register modules as well as two seven-segment digits. 7seg Click communicates with target boards via an SPI interface. It has a green LED which indicates the presence of power. An SMD jumper is available for selecting whether the board will be operating on a 3.3V or 5V power supply.
|
2012/07/19 |
|
EEPROM click Released
EEPROM click is an accessory board in mikroBus form factor. It features the 24C08WP highly reliable, high performance CMOS technology serial 8K EEPROM (in DIP package). It offers significant advantages in low-power and low-voltage applications. The 24C08WP EEPROM uses the I2C addressing protocol and 2-wire serial interface which includes a bidirectional serial data bus synchronized by the clock. Address selection SMD jumpers and a power LED are available on board. Another SMD jumper is available for selecting whether board will be operating on a 3.3V or 5V power supply.
|
2012/07/19 |
|
Flash click Released
The Flash Click board is an accessory board in mikroBUS form factor. It's a compact and easy solution for adding flash memory to your device. It features M25P80 8Mbit serial Flash memory module with advanced hardware write protection mechanisms. It supports high-performance commands with a clock frequencies of up to 75MHz. Memory is divided into 16 sectors, each containing 256 pages. Flash Click communicates with the target board via an SPI interface. The board is designed to use a 3.3V power supply only. It has a green LED which indicates when the board is powered.
|
2012/07/19 |
|
