|
mikroMedia HMI 3.5" Released
A smart display solution, mikromedia HMI 3.5" has a high-brightness 320x240px color display on the front, and a powerful FT900Q 32-bit MCU with additional essential circuitry on the back - making it a standalone but cost-effective solution suitable for industrial applications.
|
2016/05/31 |
|
TouchClamp click (Capacitive) Released
TouchClamp click is a mikroBUS add-on board with NXP's MPR121 proximity capacitive touch sensor controller. It has seven plated holes for clamps which can be used to connect any - literally any - conductive object in order to use it as an input button to send an interrupt to the target board MCU. It's great for creating installations where users interact with the environment in unexpected ways. There's also an extra capacitive button in the middle. TouchClamp click communicates with the target MCU through the mikroBUS INT pin and I2C interface (SCL, SDA). The board has an onboard ADDR. SEL. jumper for choosing I2C addresses. Designed to use a 3.3V power supply only.
|
2016/05/30 |
|
Flash 2 click Released
Flash 2 click is a mikroBUS add-on board for adding more Flash Memory to your target board microcontroller. It carries Microchip's SST26VF064B flash-memory module with 64 Mbits capacity. It's a highly reliable module with a specified minimum of 100,000 read and write cycles and with over 100 years of Data Retention. For data security, the module features a One-Time Programmable (OTP) 2 KB bit secure ID and a 64 bit unique, factory pre-programmed identifier. Additional software security measures include inidividual-block write Protection with permanent lock-down capability. Flash 2 click communicates with the target MCU through the mikroBUS SPI interface (CS#, SCK, MISO, MOSI) with additional functionality provided by the #HOLD pin (in place of default mikroBUS™ RST pin). The board is designed to use a 3.3V power supply.
|
2016/05/30 |
|
RFid Tag 13.56MHz Released
ISO14443-A
|
2016/05/10 |
|
microUSB-B Cable - Braided Released
The 2 meter long cables look and feel nice, and are made of a sturdy and durable material that will last for years. These cables come in silver, brown (more of an orange/bronze color), pink (rose red would be more accurate), green and blue.
USB-A to microUSB-B
|
2016/05/10 |
|
Riverdi Display 7" Released
A high-quality cost-effective 7" TFT display with optional touch screen and a decorative cover glass (bezel) option on the capacitive touch models. Well integrated with MikroElektronika tools. The 800x480px screen is driven by an FT81x graphic controller which is supported in Visual TFT, the GUI design tool for rapid development of user interfaces.
Note: This product uses an FFC connector. You will need either a matching connector on your board, or a Riverdi click board, in order to connect to the display.
|
2016/05/09 |
|
Riverdi Display 5" Released
A high-quality cost-effective 5" TFT display with optional touch screen and a decorative cover glass (bezel) option on the capacitive touch models. Well integrated with MikroElektronika tools. The 800x480px screen is driven by an FT81x graphic controller which is supported in Visual TFT, the GUI design tool for rapid development of user interfaces.
Note: This product uses an FFC connector. You will need either a matching connector on your board, or a Riverdi click board, in order to connect to the display.
|
2016/05/09 |
|
Riverdi Display 4.3" Released
A high-quality cost-effective 4.3" TFT display with optional touch screen and a decorative cover glass (bezel) option on the capacitive touch models. Well integrated with MikroElektronika tools. The 480x272px screen is driven by an FT80x graphic controller which is supported in Visual TFT, the GUI design tool for rapid development of user interfaces.
Note: This product uses an FFC connector. You will need either a matching connector on your board, or a Riverdi click board, in order to connect to the display.
|
2016/05/09 |
|
Riverdi Display 3.5" Released
A high-quality cost-effective 3.5" TFT display with optional touch screen and a metal mounting frame for easier integration. Easy to use with MikroElektronika development tools. The 320x240px screen is driven by an FT80x graphic controller which is supported in Visual TFT, the GUI design tool for rapid development of user interfaces.
Note: This product uses an FFC connector. You will need either a matching connector on your board, or a Riverdi click board, in order to connect to the display.
|
2016/05/09 |
|
Riverdi Display 2.8" Released
A high-quality cost-effective 2.83" TFT display with optional touch screen and a decorative cover glass (bezel) option on the capacitive touch models. Well integrated with MikroElektronika tools. The 240x320px screen is driven by an FT80x graphic controller which is supported in Visual TFT, the GUI design tool for rapid development of user interfaces.
Note: This product uses an FFC connector. You will need either a matching connector on your board, or a Riverdi click board, in order to connect to the display.
|
2016/05/09 |
|
Riverdi click Released
Riverdi click is a simple adapter for connecting Riverdi TFT displays to a mikroBUS socket. It features a zif20 connector for interfacing between your target board microcontroller and a FT8xx graphic controller on one of the many available Riverdi displays. A set of onboard jumpers allow you to switch between I2C and SPI communication lines. This simple click also has standard click board SMD jumpers for switching between a 3.3V and a 5V power supply. Browse the selection of over 20 available displays that come in different sizes, with touchscreen options, as well as several framing options. A 20-way ribbon cable, for connecting to the Riverdi display, is included in the package.
|
2016/05/09 |
|
SHT click Released
SHT click is a temperature and humidity sensing click board that carries Sensiron's SHT3x-DIS IC. Compared to its predecessor (SHT11), SHT3x click has increased reliability and enhanced signal processing features with a high signal-to-noise ratio. Best measurement results are achieved within a 5-60° temperature range (0.015 resolution) and a 20%–80% RH humidity range (0.01 resolution). SHT click outputs a fully calibrated, linearized, and temperature compensated digital output through the mikroBUS I2C interface (SCL, SDA). An additional INT pin is for setting up alerts for certain temperature or humidity values. Finally, a RST pin allows you to reset the sensor. Designed to use either 3.3V or 5V power supply.
|
2016/05/09 |
|
TextToSpeech click Released
Text To Speech click is a mikroBUS add-on board that carries an Epson S1V30120 speech synthesis IC. The IC is powered by the Fonix DECtalk v5 speech synthesis engine that can make your robot or portable device talk in US English, Castilian Spanish or Latin American Spanish, in one of nine pre-defined voices. The DECtalk engine includes a parser that gives users fine control over the quality, pitch and intonation of the synthesized speech. The audio is reproduced at 11.025kHz sampling rate. Text To Speech click board communicates with the target board microcontroller through the mikroBUS SPI interface (MISO, MOSI, SCK, CS) with additional functionality provided by DRDY, NRST and MUTE pins (in place of default mikroBUS INT, RST and AN pins) It can use either a 3.3V or 5V power supply.
|
2016/05/09 |
|
mikroProg for CEC Released
mikroProg for CEC is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support the CEC cryptographic engine with secure firmware updating. Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in mikroElektronika ARM compilers
|
2016/05/09 |
|
clicker 2 for CEC1302 Released
clicker 2 for CEC1302 is a compact development kit with two mikroBUS sockets for click board connectivity. You can use it to quickly build your own gadgets with unique functionalities and features.
|
2016/05/09 |
|
CEC1302 clicker Released
CEC1302 clicker is an amazingly compact starter development kit which brings click board connectivity to the 32-bit ARM Cortex-M4 CEC1302 microcontroller with an integrated cryptographic engine. Connect the desired click board to enhance it with awesome features. It's preprogrammed with a fast USB HID bootloader. Use it to upload your firmware and clicker will become a working device. Board features all you need to get started: 32-bit CEC1302 microcontroller, USB connector, two LEDs and push buttons, reset button, mikroProg connector and headers for interfacing with external electronics.
|
2016/05/09 |
|
mikroMedia Plus for STM32F7 Released
Create control interfaces, run multimedia content, play games, and even movies with fantastic mikromedia boards, now faster than ever, with mikromedia plus for STM32F7.
Powered by an ARM Cortex-M7 STM32F746ZG MCU that can operate at 462 DMIPS it has twice the speed of its M4 predecessor.
The mikromedia plus form factor carries a 4.3 inch 480px x 272px touch TFT display on the front, and plenty of multimedia modules on the back: MP3 codec, Accelerometer, microSD card slot, USB or USB UART connection, Programmer connectors and Battery Charger with connector.
|
2016/04/21 |
|
Proteus Visual Designer Student Competition
Proteus Visual Designer is a new product from Labcenter Electronics which enables users to "write" code using a drag-and-drop flowchart interface. The tool is designed to make microcontroller programming as easy and intuitive as possible, and automatically takes care of all the nitty-gritty behind the scenes work (such as automatically setting up digital/analogue I/O pins, by detecting how those pins are used in the application).
To promote Visual Designer, Labcenter are running a Student Competition, with prizes of up to $1,000 (approximately R15,000 at the time of writing).
To participate, students simply need to enrol their institution (high-school / university) in the competition. Competition software and licenses will be supplied to the institution, and students are challenged to come up with the most impressive Visual Designer design. Entries should be submitted to the teacher / lecturer at the relevant institution for judging, and the winning student will receive a free Professional Visual Designer license and software, as well as being entered into the worldwide competition for cash prizes ($1,000 for first place, $500 for second place and $250 for third place). For more information please click here for the competition poster, and/or contact us.
|
2016/02/16 |
|
IR Gesture click Released
IR Gesture click is a mikroBUS add-on board that enables contactless gesture recognition, along with ambient light and proximity sensing capabilities with the APDS-9960 IC. This sensor integrates an LED and four directional photodiodes that receive the reflecting light. An internal gesture engine deduces the velocity, direction and distance of nearby objects (while cancelling the ambient light). You can implement a variety of gestures, from from basic directional swipes (up, down, left or right) to more complex combinations. Since the chip can work as a proximity sensor, the gesture engine can be configured to wake up automatically when a user's hand approaches. The board communicates with the target board MCU through the mikroBUS I2C interface, with an additional hardware inerrupt pin (INT). IR Gesture click uses a 3.3V power supply.
|
2016/02/08 |
|
10DOF click (Accel, Gyro, Mag, Fusion, Pressure) Released
10DOF click is a mikroBUS add-on board for enhancing hardware prototypes with 10DOF functionality (10 degrees of freedom). The click board carries two modules from Bosch: BNO055, a 9-axis absolute orientation sensor and BMP180, a digital pressure sensor. The BNO055 contains 3 sensors: a 3-axis 16-bit gyroscope, a 14-bit 3-axis accelerometer, and a 3-axis magnetometer, as well as a 32-bit ARM Cortex-M0 MCU with Bosch Sensortec sensor fusion algorithms. The pressure sensor is based on piezo-resistive technology, enabling high accuracy, linearity and long term stability. 10DOF click communicates with the target board MCU through the mikroBUS I2C interface (SCL, SDA), with additional functionality provided by INT and RST pins. Designed to use a 3.3V power supply only.
|
2016/01/27 |
|
