|
|
| |
|
 | Search: |
|
|
 |
|
|
IrThermo 3 click is a device which allows contactless measurement of the object temperature. It uses highly advanced MLX90632 FIR sensor, which detects the average temperature of objects within its field of view (FOV), which is typically ±25°. It is factory calibrated, with the calibration constants stored in its internal EEPROM. Besides EEPROM used for storing trimming values, device settings, and calibration constants, it has additional RAM area that can be used for auxiliary measurement data storage. The integrated temperature sensor provides ambient temperature measurement, necessary for a proper calibration. The device is calibrated to sense objects with the temperature ranging from -20 ? up to 200 ?, and the ambient temperature ranging up to 80?. The measurement resolution is 0.02?. Measured data is available via the industry standard I2C communication bus. |
|
|
|
|
 |
|
|
IrThermo Click features either the MLX90614ESF-BAA (3.3V) or MLX90614ESF-AAA (5V) single zone infrared thermometer module capable of non-contact temperature measurements. It is calibrated in wide temperature ranges: -40 to 85°C for the ambient temperature and -70 to +380°C for the object temperature (-20 to 120°C in PWM mode). IrThermo Click communicates with the microcontroller via mikroBUS I2C lines (SCL, SDA) or PWM line. The sensor is ideal for automotive use, industrial temperature control, body temperature measurement, movement detection, air conditioning control and more. |
|
|
|
|
|
|
IrThermo 2 click is a non-contact temperature measurement solution. The click board carries the TMP007 infrared thermopile sensor with an integrated math engine. The sensor absorbs the infrared radiation emitted by the target object (within the sensor's field of view) and the integrated math engine calculates its temperature by comparing it with the temperature of the silicon die. The measurement range of the sensor is between -40°C to 125°C (with a 14-bit resolution). The board is designed to use either a 3.3V or a 5V power supply. |
|
|
|
|
|
|
Weather click carries BME280 integrated environmental unit from Bosch. It's a sensor that detects humidity, pressure and temperature, specifically designed for low current consumption and long term stability. Those features make it ideal for applications like home automation control, personalized weather stations, sport and fitness tools and so on. The sensor has three operating modes: sleep, forced, and normal. Also, the humidity and pressure sensors can operate independently. Weather click can communicate with the target MCU either through mikroBUS SPI or I2C interfaces. The board is designed to use a 3.3V power supply. |
|
|
|
|
|
|
