4-digit 7-seg display
Driving 7-segment displays is fun! EasyAVR v7 provides a 4-digit display for your applications.
ADC potentiometers
You can simulate analog inputs using two provided analog potentiometers, which can be connected to each of the 12 supported microcontroller analog input pins.
GLCD/LCD Backlight
The GLCD and LCD backlight can be dimmed using a PWM signal from the microcontroller, or they can be turned on in full brightness.
Crystal oscillator
An 8MHz oscillator circuit, which provides an external clock, is connected to the microcontroller osc pins.
DS1820 Temp Sensor
The board supports the Dallas DS1820 One-Wire digital temperature sensor. You can measure temperatures from -55C to +125C (-67F to +257F), with 0.5C accuracy.
GLCD 128x64 pixels
You can place a 128x64 GLCD display directly on the board and firm it in place securely using the high-quality plastic distancer, specially designed for this purpose.
GLCD contrast potentiometer
This potentiometer allows you to adjust the contrast level of the pixels on your 128x64 GLCD display.
Oscilloscope GNDs
Three separate GND pins are available on the board for easier connection of GND reference for oscilloscope probes.
I2C EEPROM
You can store 8x256 bytes of configuration data (or other data) into the on-board 24AA01 Serial EEPROM with I2C interface.
JTAG connector
A JTAG compatible connector is provided, so you can override the on-board mikroProg, in case you need to use an external programmer or debugger with the EasyAVR v7.
PORT Headers
Two male IDC10 port headers are available in each Input/Output group, which is convenient for easier access to any PORT pin.
LCD 2x16 characters
The board is equipped with a LCD connector which allows you to connect a 2x16 LCD display and place it securely using plastic distancer, specially designed for this purpose.
LCD contrast potentiometer
This potentiometer allows you to adjust the contrast level of the pixels on your 2x16 LCD character display.
LM35 Temp Sensor
The LM35 is a low-cost, precision integrated-circuit, analog temperature sensor. It can measure temeperatures from -55C to +150C with 0.25C accuracy at room temperatures.
ATmega32
With just enough RAM and Flash, the ATmega32 microcontroller will provide you with enough power for most of your projects.
mikroBUS socket 1
EasyAVR™ v7 provides three mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.
mikroBUS socket 2
EasyAVR™ v7 provides three mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.
mikroBUS socket 3
EasyAVR™ v7 provides three mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.
mikroProg
On-board mikroProg™ In-System programmer supports 64 AVR® microcontrollers from Atmel®.
Programmer USB connector
Programmer USB connector is connected to the on-board mikroProg, but can also be used to power the board when the J22 jumper in the Power Supply section is in the USB position.
Piezo Buzzer
With piezo buzzer you can debug your applications, or have audio signalization feature. It can be connected to two digital output pins, one of which is the output of PWM module.
PORT Headers
Two male IDC10 port headers are available in each Input/Output group, which is convenient for easier access to any PORT pin.
Dual Power Supply
Board is equipped with power supply unit capable of supporting both 3.3V and 5V microcontrollers. Board can be powered over USB cable, or external adapter connectors.
Reset Button
High quality reset button with surrounding reset circuitry ensures stable reset operation.
RS-232 Connector
You can implement UART communication through RS-232 connector provided on the board.
SMD LEDs
Each Input/Output PORT group contains red SMD LEDs with low current consumption of only 1mA. Board contains total of 36 LEDs for PORT pins.
Touch Panel Controller
Touch panel controller with connector is provided for analog resistive touch panels attached to the GLCD 128x64 to form GLCD Touch screen.
Tri-state DIP switches
Tri-state DIP switches are used to enable 4K7 pull-up or pull-down resistor on ony desired PORT pin.
USB-UART Connector
FTDI chip allows your EasyAVR v7 board to be connected with a PC through USB cable over UART connection.
Up-Close
Hover your mouse over different parts of the board in order to view the details up-close.
