|
|
| |
|
 | Search: |
|
|
 |
|
|
Thermo 6 click is a precise and versatile ambient temperature measurement click board™, based on the Maxim Integrated MAX31875 temperature sensor.
This sensor has a great combination of features, such as wide range of temperature measurement, excellent measuring accuracy, and small die size, coupled with the very low power consumption - attributes that make this sensor a great choice for many different applications. |
|
|
|
|
 |
|
|
THERMO Click is an accessory board in mikroBUS form factor. It features the MAX31855K thermocouple-to-digital converter as well as a PCC-SMP connector for K-type thermocouple probes. The MAX31855K measures a temperature range of between -270°C and 1372°C with a sensitivity of about 41uV/°C. It has a built-in 14-bit ADC converter. THERMO Click communicates with the target board via an SPI interface (read-only). The board is designed to use a 3.3V power supply only. It has a green LED which indicates if the board is powered. |
|
|
|
|
|
|
THERMO K click carries the MCP9600 IC from Microchip. Depending on the type of probe it uses the click can measure temperatures from -200 °C to +1372 °C.
The click is designed to run on either a 3.3V or 5V power supply. It communicates with the target MCU via an I2C interface. |
|
|
|
|
|
|
Thermo 2 click carries DS1825, a programmable resolution digital thermometer IC. It measures temperature within a range from - 10°C to 85°C with +/-0.5°C accuracy. You can specify the resolution of the measurements, from 9 to 12-bit, depending on the application. The board communicates with the target microcontroller through a 1-wire interface. Using the onboard jumper, you can choose between two mikroBUS pins for setting the output. Thermo 2 click also features four Address Select jumpers for setting a unique ID for the sensor (allowing for up to 16 sensors to operate on a single 1-Wire bus). |
|
|
|
|
|
|
Thermo 3 click carries TMP102, a digital temperature sensor IC with a tiny footprint of only 1.6mm x 1.6mm.. Without requiring calibration, TMP102 is accurate within 0.5°C. Measurement range is between -25°C to 85°C. An integrated 12-bit ADC allows for measurement resolutions down to 0.0625°C. Thermo 3 click communicates with the target board MCU through mikroBUS I2C pins (SCL, SDA), and an additional Alert pint (INT on the default mikroBUS configuration). The board is designed to use a 3.3V power supply only. |
|
|
|
|
|
|
THERMO 4 click carries the LM75A digital temperature sensor and thermal watchdog. The sensor has the range from -55 °C to +125 °C. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line. |
|
|
|
|
|
|
THERMO 5 click measures temperature in default range of 0°C to 127°C and extended range of -64°C to 191°C with ±1°C accuracy. It carries the EMC1414 temperature sensor. The click is designed to run on a 3.3V power supply. THERMO 5 click communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line. |
|
|
|
|
|
|
Weather click carries BME280 integrated environmental unit from Bosch. It's a sensor that detects humidity, pressure and temperature, specifically designed for low current consumption and long term stability. Those features make it ideal for applications like home automation control, personalized weather stations, sport and fitness tools and so on. The sensor has three operating modes: sleep, forced, and normal. Also, the humidity and pressure sensors can operate independently. Weather click can communicate with the target MCU either through mikroBUS SPI or I2C interfaces. The board is designed to use a 3.3V power supply. |
|
|
|
|
|
|
