Our new website is available at new.dizzy.co.za :-).

X
+27 (0)11 022 5323 +27 (0)64 681 8495
Basket/Checkout
R
- -
Category: (Go to Store Home)
Folder Microcontroller Boards
Folder Accessory Boards
Folder Parts & Components
Folder Programmers
Folder Software
Folder Books
Folder Industrial Communication
Folder Miscellaneous
(i) Discounts
(i) Kits & Bundles
(*) On Special (116 items)
Catalogue Tool
Basket Basket: (Stock / Shipping Info)

Start adding items to your basket to see if any discount / free shipping is available for your order.
(Prices exclude VAT)
MagnifierSearch:
LED Flash 2 click (Go to Parent Category)

LED Flash 2 click

LED Flash 2 click is a powerful flash/torch click, featuring the MIC2870 from Microchip, a high-efficiency flash LED driver, optimized for driving one or two high-brightness camera flash LEDs. The MIC2870 IC can drive one high brightness LED up to 1.5A or two high brightness LEDs, up to 750mA each. Two high brightness LEDs are already mounted on the Led Flash 2 click, so the click board is ready to be used right away.

LED Flash 2 click provides two modes of operation - the Torch mode and the Flash mode. While working in Torch mode, the output current is adjusted so that the continuous operation of the LEDs is provided. When it is set to work in the Flash mode, the LED current is maximized and while giving a powerful light, it can not work for prolonged periods. The Torch mode will turn the click board™ into a simple handheld torchlight, while the Flash mode is good for using the LEDs as the camera flash, providing good images in various low light situations.

R405  Qty:
Price ex. VAT. Weight: 23g. Stock: Lead-time applicable [i]. mikroE Icon
Accessory Boards > Display / Touch Panel > LED / Segment Displays 
LEDs used to display numbers, text, images and other information.
LED Flash click
LED Flash click LED Flash click functions as a high power LED flash, and carries the CAT3224 flash LED driver. The click is designed to run on a 5V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS™ line: AN, RST, PWM, and INT.
R940  Qty:
Price ex. VAT. Stock: Lead-time applicable [i]. mikroE Icon
EasyLED Board
EasyLED Board The EasyLED Board is an effective and low-cost solution for visual indication of output signals. LEDs are used for visual indication purposes. This board can be connected to a prototype device via an IDC10 connector.
On SpecialOn SpecialOn Special Red LEDs    R120  R190  Qty:
Price ex. VAT. Weight: 10g. Stock: 1 available immediately [i]. mikroE Icon
Green LEDs    R170  Qty:
Price ex. VAT. Weight: 10g. Stock: Lead-time applicable [i]. mikroE Icon
Yellow LEDs    R170  Qty:
Price ex. VAT. Weight: 10g. Stock: Lead-time applicable [i]. mikroE Icon
LED Ring click
LED Ring click LED Ring click is a mikroBUS add-on board with a ring of 32 red LEDs driven by four 8-bit 74HC595 serial-in, parallel-out shift registers. The ring is 25mm in diameter. The click communicates with the target MCU through the mikroBUS SPI interface, with RST, CS, SCK, MISO and MOSI pins marked MR#, LAT, CLK, DSOUT, DSIN, respectively. The board is designed to use either a 3.3V or 5V power supply only.
Red LEDs    R525  Qty:
Price ex. VAT. Est. Weight: 20g. Stock: Lead-time applicable [i]. mikroE Icon
32x32 RGB LED Matrix Panel
32x32 RGB LED Matrix Panel Hi-brightness RGB LED matrix panel, with 1024 RGB LEDs arranged in a 32x32 grid on the front. Comes with one IDC cable and a power cable.
The panel is driven by shift registers, for more information please see the Learn Article.
5mm Pitch, 160x160mm    R1,200  Qty:
Price ex. VAT. Est. Weight: 300g. Stock: Lead-time applicable [i]. mikroE Icon
6mm Pitch, 190x190mm    R1,200  Qty:
Price ex. VAT. Weight: 350g. Stock: Lead-time applicable [i]. mikroE Icon