|
|
| |
|
 | Search: |
|
|
 |
|
|
If you are building any type of human machine interface, OLED Switch click can help you keep the design simple, clear and interactive. It can be used in designing a control panel for an industrial machine... or a DIY arcade.
This board has a module that combines a button and a full color organic LED display, plus input/output screw terminals for connecting an external circuit (to toggle it on and off).
The mechanical button itself is nicely built, with a translucent black housing. When pressed, it gives satisfying tactile feedback.
The display, built in the button itself, can show 64 by 48 pixel images with up to 65k colors (16-bit depth). |
|
|
|
|
 |
|
|
OLED click carries a 96 x 39px white or blue monochrome passive matrix OLED display. The display is bright, has a wide viewing angle and low power consumption. To drive the display, OLED click features an SSD1306 controller. It's built-in functionalities include contrast control, normal or inverse image display, vertical and horizontal scrolling functions and more. OLED click can communicate with the target board MCU either through SPI or I2C mikroBUS lines. You switch between output options by resoldering the onboard SEL COMM jumpers (J1, J2 and J3) to the appropriate position. OLED click uses a 3.3V power supply.
|
|
|
|
|
|
|
OLED C click lets you add a small but bright and crisp 1.1" full-color display to your design. It carries a passive matrix OLED display capable of displaying 65K colors, and a SEPS114A display driver and controller. The controller has numerous built-in functionalities like vertical scrolling, horizontal panning, fade in/out, a programmable panel size (partial display), a power saving mode and more. OLED C click communicates with the target board through mikroBUS SPI lines: CS, SCK, and MOSI (SDI); and AN (R/W), PWM (A/C) and RST lines. OLED C click uses a 3.3V power supply. |
|
|
|
|
|
|
