Microcontroller Boards > Display Boards > MikroMedia (2.8")
 |
MikroMedia boards feature a 2.8" touch-screen 320x240 TFT display, 3.5mm jack connected to a stereo MP3 codec and MicroSD card slot. They also feature a USB bootloader/programmer (depending on the board), meaning that no additional programmer is required.
Expansion shields are also available.
|
Accessory Boards > Display / Touch Panel > FT8xx EVE TFT Displays
 |
FT8xx EVE Displays feature an FT8xx graphics controller chip, which brings fast and visually stunning graphics to even low-cost 8-bit MCUs. The state-of-the-art FT8xx graphics controller integrates display, audio and touch onto a low cost, easy-to-use, single-chip solution. The units feature a simple SPI interface with interrupt support and stereo audio output. mikroElektronika provide a free FT8xx libraries for all of their mikroC, mikroBasic and mikroPascal compilers, and the displays are also supported in their VisualTFT GUI design software.
|
 |
|
|
The TFT-PROTO Board contains the MIO283QT-9A 2.8" TFT color display 320x240 with resistive touch screen and ILI9341 display controller. This board can be easily connected to your development board or prototype device. On-board Marks describe connections and some other useful notes. |
|
|
|
|
|
|
MIO283QT-9A
320 x 240 pixels
ILI9341 Display Controller
Resistive Touch Screen
Module Size: 42.7 x 60.3mm
Viewing Area: 36.7 x 49mm |
|
|
|
|
|
|
mikroTFT is a breakout board for MI0283QT-9A 2.8" TFT color display with 320 x 240 pixel resolution, driven by ILI9341 display controller. TFT display is covered with a resistive touch panel which can be used as an input device. For further connectivity two 1x26 side headers are provided. Mounting holes (∅ 2.29 mm) located in each corner simplify integration. Board is designed in the same form factor as mikromedia boards. This allows you to easily switch from mikroTFT to mikromedia, and vice-versa, while retaining most of the integration features. |
|
|
|
|
|
|
TFT Proto 4.3" carries a 480x272 ATO43B35 TFT screen covered with a 4-wire resistive touchscreen panel. To drive the 262k-color display, there's an SSD1963 graphic controller with a 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode (accessed through the GPIO0 pin on the side of the board). The touchpanel is driven by an advanced STMPE811 controller. The board is lined with two rows of 26 pins for interfacing it with your MCU. TFT Proto 4.3" uses a 3.3V power supply only. |
|
|
|
|
|
|
TFT Proto 5" carries a 800x480 HT050AWV40T TFT screen covered with a 4-wire resistive touchscreen panel. To drive the 262k-color display, there's an SSD1963 graphic controller with a 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode (accessed through the GPIO0 pin on the side of the board). The touchpanel is driven by an advanced STMPE811 controller. The board is lined with two rows of 26 pins for interfacing it with your MCU. TFT Proto 5" uses a 3.3V power supply only. |
|
|
|
|
|
|
TFT Proto 7" carries a 800x480 FRD070IF40-A TFT screen covered with a 4-wire resistive touchscreen panel. To drive the 262k-color display, there's an SSD1963 graphic controller with a 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode (accessed through the GPIO0 pin on the side of the board). The touchpanel is driven by an advanced STMPE811 controller. The board is lined with two rows of 26 pins for interfacing it with your MCU. TFT Proto 7" uses a 3.3V power supply only. |
|
|
|
|
|
