Power Connector
Either a DC jack or a screw-terminal connector can be soldered to the board, for connecting an external power-supply (the board can also be powered via USB).
miniUSB Connector
A miniUSB connector is included on-board.
Reset Button
A reset button is included on-board.
PortB Socket
The PICs PortB pins are exposed via this socket. Additional connections are also provided which conform to the 2.54mm grid of all other connections on the board.
16MHz Oscillator
A replaceabled 16Mhz oscillator is included on-board.
USB-UART Interface
The FT232R chip provides an easy UART (serial) interface to a PC via USB.
Power Socket
VIN, VSYS, 3V3, 5V, GND and RST connections are provided via this socket.
PIC18F25K22
A replaceable PIC18F25K22 is included on-board.
mikroBus Socket (Left)
A mikroBus socket is included on-board, which allows mikroElektronika "click" accessory boards to be easily connected.
mikroBus Socket (Right)
A mikroBus socket is included on-board, which allows mikroElektronika "click" accessory boards to be easily connected.
microSD Socket
A microSD socket is included on-board.
PortA / Analogue Socket
The PICs PortA pins are exposed via this socket.
PortC Socket
The PICs PortC pins are exposed via this socket.
Programming Connections
Programming connections for both the mikroProg and PICkit programmers are provided.
"ISP" Header
An "ISP" header - with power, SPI and reset connections - is included on-board for compatibility with Arduino shields.
Power and PortC.2 LEDs
A power LED and LED connected to the PICs PortC.2 pin are included on-board.
System Voltage Jumper
This jumper is used to switch VSYS, which is used to power the PIC, between 3.3V and 5V.
Up-Close
Hover your mouse over different parts of the board in order to view the details up-close.
