 |
|
|
The GPS click (previously EasyGPS) board is a compact solution for adding GPS functionality to your device. It features the LEA-6S, high performance u-blox 6 positioning engine. Board is organized in mikroBUS form factor. Communication is done using UART or USB connection.
This board can be operated at 3.3V only.
Can be used without a microcontroller by connecting straight to a PC via USB. |
|
|
|
|
|
|
GPS2 Click is an add-on board in the mikroBUS form factor. It includes the Quectel L30 GPS module as well as an SMA antenna connector. The module has an advanced jamming suppression mechanism and innovative RF architecture ensuring maximum GPS performance. It supports location, navigation and industrial applications including autonomous GPS C/A, SBAS (WAAS or EGNOS) and A-GPS. The board is designed for use with active antennas. SMD jumpers are provided in three groups for selecting between UART, I2C and SPI communication lines. Another SMD jumper is used to select between 3.3V or 5V power supply. |
|
|
|
|
|
|
Nano GPS click carries the Nano Hornet module from OriginGPS. It's the smallest GPS module with an integrated patch antenna (measuring just 10x10x3.8mm). Hence, Nano GPS click is also the smallest of all MikroElektronika GPS click boards. Despite its size, it offers superior sensitivity and outstanding performance, with time to first fix (TTFF) of less than 1 second, accuracy of approximately 1m, and tracking sensitivity down to -163dBm. |
|
|
|
|
|
|
GSM-GPS click is a mikroBUS add-on board with a SIM808 module that combines GSM/GPRS and GPS into a single device. Ideal for remote tracking devices in any shape or form.
The high-performance GSM/GPRS engine works on GSM, EGSM, DSC and PCS frequencies. The GPS has a 1 second TTF (Time To First Fix) from a hot start and 30 seconds from a cold start. Tracking sensitivity is -165 dBm.
The board has two antenna connectors, one for GSM the other for GPS. The bottom side has a SIM card slot and a Micro USB connector for interfacing with a PC.
GSM-GPS click communicates with the target board MCU through mikroBUS UART interface, with additional functionality provided by STAT, PWRKEY, RTS, RS, and CTS. Beside the mikroBUS, the board has additional pins for connecting speakers and a microphone to the GSM engine.
GSM-GPS click uses either a 3.3V or 5V power supply. |
|
|
|
|
|
|
GNSS click carries Quectel’s L86 GNSS module with a patch antenna along with an external antenna connector. GNSS stands for Global Navigation Satellite System, an umbrella term that describes both the United States GPS and the Russian GLONASS global positioning systems. Excluding its wider applicability, the L86 module is similar to the L80 module (used on GPS3 click). It includes the same set of technologies: automatic prediction of orbits from internally stored data, adaptive adjusting of on/off time to balance between positioning accuracy and power consumption etc. The board uses a 3.3V power supply. |
|
|
|
|
|
|
GNSS2 click carries Quectel's L76 module and an SMA antenna connector. GNSS stands for Global Navigation Satellite System, an umbrella term that describes both the United States GPS and the Russian GLONASS global positioning systems. The L76 module integrates performance-enhancing Quectel technologies. It can automatically predict satellite orbits from data stored in its internal flash (EASY technology) and it can adaptively adjust its on/off time to balance between positioning accuracy and power consumption (AlwaysLocate technology). GNSS2 click also features a voltage translator. Using the onboard jumper you can switch both the power supply and logic levels from 3.3V to 5V. |
|
|
|
|
|
|
GNSS3 click carries SIMCom's SIM33ELA standalone GNSS module with an integrated antenna (as well as a connector for an external one). GNSS stands for Global Navigation Satellite System, an umbrella term that describes both the United States GPS and the Russian GLONASS global positioning systems. The SIM33ELA module has MTK's high sensitivity navigation engine. It features EPO orbit prediction, AGPS and SBAS ranging (WAAS, EGNOS, GAGAN, MSAS). GNSS3 click communicates with the target MCU through mikroBUS UART pins (RX, TX), with additional functionality provided through RST and INT pins. The board uses a 3.3V power supply. |
|
|
|
|
|
|
The SmartGPS is a development tool that will help you understand GPS technologies. Connect GPS (Global Positioning System) to your PC or development board using the LEA-6S module. The intuitive design of SmartGPS guides you through the process of learning GPS.
The board features a switching power supply and backup battery, and can be operated at either 3.3V or 5V.
Can be used without a microcontroller by connecting straight to a PC via USB. |
|
|
|
|
|
|
GSM/GNSS click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click features Quectel's MC60 quad-band module. GSM/GNSS click runs on either 3.3V or 5V power supply and communicates with the target MCU over UART interface, and the following mikroBUS™ pins: AN, RST, PWM, INT. |
|
|
|
|
|
